26
MULTIFUNCTION COMPUTER
KEY Fig. 12
1) MODE push button
2) LOCK push button
3) START push button
4) LAP push button
(on the left half of the handlebars - pos. 6 - Fig. 5)
5) Upper display
6) Lower display
If the writing "LLL" is displayed, check
the sensor and/or the electrical connec-
tion circuit (possible failure).
If necessary contact your aprilia Official Dealer.
FUNCTION DESCRIPTION
By pressing the "M" push button once and more than
once in succession, the following functions are oper-
ated, in their respective order:
TEMP H20 (coolant temperature)
By pressing the "M"
function push button
once, the coolant
temperature in cen-
tigrade degrees (°C)
is indicated on the
upper part of the
display, while the
current time is dis-
played on its lower part.
If the temperature exceeds 100°C, the upper part of
the display blinks, even if the set function is different
from "TEMP H2O".
If the temperature is lower than 30°C, the writing
"COLD" appears on the display.
Reading range: 0 ÷ 130°C.
Fig. 12
M
S
L
VBAT
TEXT
TH2O
TIME
LAP
TIME
b
BATTERY
VB AT
TEXT
TH2OTH2O
TIME
LAP
TIME
M
S
L
To Next Page
Loading...
Need help?
General
