36
ADJUSTING THE CLUTCH
If the engine stops or tends to advance when the
gears are engaged, or if the clutch slips causing a
delay in the acceleration in comparison with the en-
gine speed, adjust the clutch.
Minor adjustments can be carried out by means of
the adjuster (1-Fig. 18):
– loosen the lock nut (2-Fig. 18);
– turn the adjuster (1-Fig. 18) until the idle stroke at
the clutch lever end is about 10÷15 mm (see Fig.
18). Tighten the lock nut (2-Fig. 18) and check the
adjustment.
Fig. 18