CYCLE PARTS
5 - 40
SCARABEO 500
5.6.6. CHECKING THE COMPONENTS
OUTER SLEEVE
• Inspect the sliding surface for scoring and/or
scratching. Eliminate minor scoring with wet sand paper
(grain size 1).
• Replace the stanchion if badly scored.
• Check for stanchion buckling using a dial gauge.
• Replace the stanchion if buckled beyond the
service limit.
Max. allowed buckling: 0.2 mm.
DANGER
NEVER attempt to straighten a buckled
stanchion as this would weaken the overall
structure leading to a dangerous riding
condition.
SLIDER
• Inspect for damage and/or cracking. Replace if
damaged.
• Change any component which is badly worn or
damaged.
Renew the following components on assembly:
- O-ring on plug (1);
- oil seal (2);
- dust seal (3);
To Next Page
Loading...
Need help?
General