CYCLE PARTS
5 - 28
SCARABEO 500
5.5.2. CHANGING THE PADS
FRONT BRAKE
• Remove the calliper, see (REMOVING THE
FRONT WHEEL).
• Unscrew and remove the central screw (1).
WARNING
These operations apply to both brake callipers.
• Release the retainer (2).
• Slide off the two pins (3).
• Slide out the brake pads.
WARNING
Always change both pads and ensure they are
correctly in place inside the calliper.
Do not reverse retainer (2) position upon
reassembly.
• Install two new brake pads.
• Slide in the two pins (3).
• Refit the retainer (2).
• Tighten the central screw (1).
• Correctly install the brake callipers onto brake
discs.
To Next Page
Loading...
Need help?
General