ASROCK 970 Pro User Manual

4141
4141
41
BIOS SETUP UTILITY
Advanced PCI / PnP Settings
ValueinunitsofPCI
clocks for PCI device
latency timer
register.
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
PCI Latency Timer
PCI IDE BusMaster
[32]
[Enabled]
Advanced
3.4.53.4.5
3.4.53.4.5
3.4.5
PCIPnP ConfigurationPCIPnP Configuration
PCIPnP ConfigurationPCIPnP Configuration
PCIPnP Configuration
Setting wrong values in this section may cause
the system to malfunction.
PCI Latency Timer
The default value is 32. It is recommended to keep the default value unless
the installed PCI expansion cards’ specifications require other settings.
PCI IDE BusMaster
Use this item to enable or disable the PCI IDE BusMaster feature.

ASROCK 970 Pro Specifications

General

Socket	AM3+
Chipset	AMD 970
Form Factor	ATX
Maximum Memory	32GB
PCI Express x16	2
PCI Express x1	2
PCI Slots	2
Audio Chipset	Realtek ALC892
Audio	7.1 CH HD Audio
LAN	Realtek RTL8111E
Memory Slots	4
Memory Standard	DDR3 2100(OC)
SATA 6Gb/s	6
RAID Support	RAID 0, RAID 1, RAID 10
USB 2.0 Ports	8 x USB 2.0 (4 rear, 4 front)
USB 3.0 Ports	2

Summary

Motherboard Installation Guide

Pre-installation Precautions

Essential safety guidelines and precautions to follow before installing or removing any hardware components.

CPU Installation Procedure

Step-by-step instructions for correctly installing the CPU into the motherboard socket, including alignment.

CPU Fan and Heatsink Installation

Guide on installing the CPU heatsink and fan for proper heat dissipation and connecting the fan header.

Memory Module (DIMM) Installation

Instructions for installing DDR3 memory modules into DIMM slots, including dual-channel configuration.

Expansion Slots Usage

Details on the types of expansion slots (PCI, PCI Express) and how to install expansion cards.

SATAII Hard Disk Setup Guide

SATA/SATAII Hard Disk Installation

SATA/SATAII HDD Hot Plug/Swap

SATA/SATAII HDD Hot Plug Operation

Driver Installation Guide

Installing Windows with RAID

Procedures for installing Windows 7/Vista/XP with RAID functions on SATA/SATAII HDDs.

Installing Windows without RAID

Procedures for installing Windows 7/Vista/XP without RAID functions on SATA/SATAII HDDs.

BIOS Setup Utility Configuration

Introduction to BIOS Setup

OC Tweaker Screen

Configuration section for overclocking features, CPU, and memory settings.

Advanced Configuration Settings

Hardware Health Monitoring

Boot Device Configuration

Exiting BIOS Setup