4-26 Chapter 4: Software support
4.3.7 ASUS TurboV
ASUS TurboV allows you to overclock the CPU frequency, CPU voltage, QPI/
Memory controller voltage, and DRAM voltage in WIndows
®
environment and takes
effect in real-time without exiting and rebooting the OS.
Refer to the CPU documentation before adjusting CPU voltage settings. Setting
a high voltage may damage the CPU permanently, and setting a low voltage
may make the system unstable.
• For system stability, all changes made in ASUS TurboV will not be saved
to BIOS settings and will not be kept on the next system boot. Use the
Save Prole function to save your customized overclocking settings and
manually load the prole after Windows starts.
• For system stability, set ASUS EPU 6-Engine to High Performance Mode
while using ASUS TurboV.
To launch ASUS TurboV
1. Install the ASUS TurboV utility from the motherboard support DVD.
2. Click start > All Programs > ASUS > TurboV > TurboV.
Save the current settings as a prole
Shows more
settings
Applies all
changes
immediately
Undoes all
changes
without
applying
Voltage
Adjustment
bars
Default
settings
Target
settings
Overclocking tips:
• For advanced overclockability, adjust rst the Ai Tweaker items in BIOS,
and then proceed more detailed adjustments using TurboV.
• The BCLK Frequency setting in BIOS affects the adjustable range of CPU
Frequency in TurboV.
For advanced overclocking:
Set BCLK Frequency in BIOS to 200MHz or
above for an adjustment range from 200MHz to 500MHz in TurboV.
For general overclocking:
Set BCLK Frequency in BIOS below 200MHz for
an adjustment range from 100MHz to 250MHz in TurboV.
To Next Page
Loading...
Need help?
General
