Asus P6T - Motherboard - ATX User Manual

ASUS P6T 5-3
5.1.4 Installing three CrossFireX graphics cards
1. Prepare three CrossFireX-ready graphics cards.
2. Insert the three graphics card into the PCIEX16 slots. If your motherboard
has more than three PCIEX16 slots, refer to Chapter 2 in this user manual
for the locations of the PCIEX16 slots recommended for multi-graphics card
installation.
3. Ensure that the cards are properly seated on the slots.
4. Align and rmly insert the two
CrossFireX bridge connectors to the
goldngers on each graphics card.
Ensure that the connectors are rmly
in place.
5. Connect three independent auxiliary
power sources from the power
supply to the three graphics cards
separately.
6. Connect a VGA or a DVI cable to the
graphics card.

Asus P6T - Motherboard - ATX Specifications

General

Brand	Asus
Model	P6T - Motherboard - ATX
Category	Motherboard
Language	English