Push
Push
POWER SWITCH
Step 1 : Push hooks then take out POWER SW CABLE with POWER SWITCH HOLDER from CHASSIS.
Step 2 : Push hooks then separate POWER SW CABLE and POWER SWITCH HOLDER.
Back
28
Disassembly Notice
Please be sure to pull out AC POWER CORD.
1
Release and take out
Release
POWER SWITCH HOLDER
POWER SW CABLE
2
Release and separate
Assembly Notice
Please according to below image to assemble POWER SW
CABLE and POWER SWITCH HOLDER.
Release
Please according to below image to assemble POWER SW
CABLE(with HOLDER).
When need to reuse old POWER SWITCH HOLDER, please
make sure the hooks no broken or deformation.