Asus Z9PE-D8 WS User Manual

ASUS Z9PE-D8 WS 7-9
7.2.4 Installing four SLI-ready graphics cards
1. Prepare four SLI-ready graphics cards.
2. Insert the four graphics card into the PCIEX16 slots. If your motherboard
has more than two PCIEX16 slots, refer to Chapter 2 in this user manual
for the locations of the PCIEX16 slots recommended for multi-graphics card
installation.
3. Ensure that the cards are properly seated on the slots.
4. Align and rmly insert the 4-Way SLI bridge connector to the goldngers on
each graphics card. Ensure that the connector is rmly in place.
5. Connect four independent auxiliary power sources from the power supply to
the four graphics cards separately.
6. Connect a VGA or a DVI cable to the graphics card.
4-Way SLI bridge

Asus Z9PE-D8 WS Specifications

General

PS/2 ports quantity	1
USB 2.0 ports quantity	6
VGA (D-Sub) ports quantity	0
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	2
USB 2.0 connectors	4
Chassis intrusion connector	Yes
PCI Express x16 slots	7
Memory channels	Quad-channel
Supported memory types	DDR3-SDRAM
Maximum internal memory	256 GB
Supported memory clock speeds	1066, 1333, 1600, 1866, 2000, 2133 MHz
BIOS type	UEFI
ACPI version	2.0a
BIOS memory size	64 Mbit
RAID levels	0, 1, 5, 10
LAN controller	Intel® 82574L
Ethernet interface type	Gigabit Ethernet
Parallel processing technology support	4-Way SLI, Quad-GPU CrossFireX
Component for	PC
Motherboard chipset	Intel® C602
Audio output channels	7.1 channels
Motherboard form factor	SSI EEB
System bus rate	8 GT/s
Processor manufacturer	Intel

Weight and Dimensions

Depth	330 mm
Width	305 mm