ATC Sun Ray RF Series User Manual

6
MOUNTING THE RADIATOR
Place the radiator on the oor, as shown in Figure 1. For radiators with 4, 6, 8 or 10 elements position the supports
supplied with the radiator as shown in Figure 1. For radiators with 12 elements the supports should be positioned
between the second and third elements from each end.
Fig. 1
Fig. 2a
Fig. 3a
Fig. 2b
Fig. 3b
Place the supports between the elements as shown in Figure 2a, mark points on the walls through the xing holes as
shown in Figure 2b. This determines the spacing of the supports. Fix the supports to the wall with plugs and screws. Be
sure that the supports are mounted in the correct position.
Lift the radiator and hang it on the supports, as shown in Figures 3a and 3b.

ATC Sun Ray RF Series Specifications

General

Brand	ATC
Model	Sun Ray RF Series
Category	Heater
Language	English