Atlas Copco CC 1700 U User Manual

Transport using a truck
WARNING Hydraulic attachment tipping over
/ slipping
The hydraulic attachment slipping or tipping over and
falling from the loading area of a lorry may cause
serious injury.
► Place the hydraulic attachment on a pallet.
► Strap the hydraulic attachment to the pallet using
suitable strapping (see illustration in chapter
Transport using a forklift truck).
► Place the pallet with the hydraulic attachment on
an anti-slip mat.
► Secure the hydraulic attachment to the loading
area with ropes or chains; use any available
transport lugs.
♦
Secure the hydraulic attachment on the pallet and
the loading surface as shown in the following
illustration.
♦
Observe all the applicable national/regional
regulations on securing loads.
21© 2015 Construction Tools GmbH | No. 3390 5141 01 | 2015-11-16
Original instructions
TRANSPORTCC 1700 U, 1700 S

Atlas Copco CC 1700 U Specifications

General

Brand	Atlas Copco
Model	CC 1700 U
Category	Industrial Equipment
Language	English