Atlas Copco CC 1700 U User Manual

DISPOSAL
NOTICE Environmental damage due to
consumables
Hydraulic oil and cutter grease are environmentally
harmful and must not penetrate the ground or enter
the water table or water supplies.
► Collect any such consumables which may escape.
► Dispose of them in accordance with the applicable
environmental regulations.
Hydraulic demolition cutter
♦
Remove the hydraulic demolition cutter from the
carrier (see chapter Removing the hydraulic
attachment from the carrier).
♦
Remove the adapter plate (see chapter Removing
the adapter plate).
♦
Remove the hydraulic hoses from the hydraulic
demolition cutter.
♦
Clean the hydraulic demolition cutter (see chapter
Cleaning).
♦
Dispose of the hydraulic demolition cutter in line
with all applicable regulations or consult an
authorised and specialised recycling company.
Hydraulic hoses
♦
Drain the hydraulic oil from the hydraulic hoses
and collect it.
♦
Dispose of the hydraulic hoses in accordance with
the applicable regulations to avoid environmental
hazards.
Hydraulic oil
♦
Collect any hydraulic oil that escapes.
♦
Dispose of it in accordance with the applicable
environmental regulations.
Cutter grease and grease
cartridges
♦
Dispose of cutter grease and not completely
emptied grease cartridges in accordance with the
applicable regulations.
♦
Completely emptied grease cartridges can be
recycled.
© 2015 Construction Tools GmbH | No. 3390 5141 01 | 2015-11-16
Original instructions
62
CC 1700 U, 1700 SDISPOSAL

Atlas Copco CC 1700 U Specifications

General

Brand	Atlas Copco
Model	CC 1700 U
Category	Industrial Equipment
Language	English