Example of error sensor
Motor overload
In the event of motor overload:
• The compressor will stop.
• Alarm LED (5) will flash.
• The following screen will appear:
Main screen with shutdown indication, motor overload
• Contact your supplier for fault troubleshooting
• When the shutdown condition has been solved, press the enter button (7) for 5 seconds.
• When <rSt> appears on the display, the compressor can be restarted.
3.8 Service warning
Description
A service warning will appear when the service timer has reached the preset time interval.
If the service timer exceeds the programmed time interval, alarm LED (6) is blinking with a
following screen:
Instruction book
2920 7199 10 37
To Next Page
Loading...
Need help?
General
