1. Safety and compliance
1.1. Definition of Warnings and Cautions
NOTICE:
For safe operation from the start, read these instructions carefully before you
install or commission the equipment and keep them safe for future use.
Read all the safety instructions in this section and the rest of this manual
carefully and make sure that you obey these instructions. The equipment must
only be operated and maintained by trained personnel in the proper condition
and as described in this instruction manual.
Obey local and state requirements and regulations. If you have any questions
about safety, operation or maintenance of the device, please contact our
nearest subsidiary.
Important safety information is highlighted as warning and caution instructions.
Obey these instructions.
WARNING:
If you do not obey a warning, there is a risk of injury or death. Dif
ferent symbols
are used according to the type of hazard.
CAUTION:
If you do not obey a caution, there is a risk of minor injury, damage to
equipment, related equipment or process.
NOTICE:
Information about properties or instructions for an action which, if ignored, will
cause damage to the equipment.
We reserve the right to change the design and the stated data. The illustrations
are not binding.
Keep the instructions for future use.
1.2. Trained personnel
For the operation of this equipment “trained personnel” are:
Safety and compliance
12/2021 - ©Atlas CopcoPage 66996022430_C
To Next Page
Loading...
Need help?
General
