Store the pump in its packing in a covered, dry place at a temperature between
-20 °C (-4 °F) and 50 °C (122 °F).
If the vacuum pump is going to be stored without operating from time to time,
protective measures must be taken. Consult us.
7.4. Service kits
For overhauling and for preventive maintenance, a wide range of service kits is
available. Service kits comprise all parts required for servicing the component
and offer the benefits of genuine parts while keeping the maintenance budget
low.
Also, a full range of extensively tested lubricants, suitable for your specific needs
is available to keep the vacuum pump in excellent condition.
Refer to Spare Parts List for part numbers.
7.5. Disposal of used material
Used filters or any other used material (for example, lubricants, cleaning rags,
machine parts, etc.) must be disposed of in an environmentally friendly and safe
manner, and in line with the local recommendations and environmental
legislation.
Maintenance
12/2021 - ©Atlas CopcoPage 686996022430_C
To Next Page
Loading...
Need help?
General
