18 19
FMS Server based
The Atlas Copco FMS functionality is built into ToolsTalk from start making
it the best way to distribute virtual stations and features to the individual
controllers. ToolsTalk is also the best way of managing and programming
multiple controllers.
Start by uploading the capability request, received from Customer Portal, to
ToolsTalk in order to make the licenses available for distribution. After this is
done it is a very straight forward process to and features to the Power Focus
6000.
FMS USB device/non network based
The FMS USB license device is a great option for customers that do not
have the controllers networked and do not have any need for ToolsTalk
and plant level management of their controllers. With the Atlas Copco
USB license device it is possible to load and distribute virtual stations and
features to individual controllers.
After the USB device has been registered on the Atlas Copco customer
portal and the capability file has been downloaded, move the license file
to the USB device. The USB device will be used for transporting the virtual
stations and features to the controller. Plug in the USB to the controller that
needs to have additional virtual stations and features. After the device has
been inserted an icon will appear on the top right of the controller screen
or in the webHMI and by pressing this icon it is possible to add more virtual
stations and/or features to the controller.
When adding a virtual station and/or feature to the controller this means
that the amount of available functionality on the USB device will go down
based on what is added to the controller.
If a virtual station or a feature needs to be moved from a controller to
another one just plug in the same USB stick as the one that was used to add
it originally and move it back to the USB device. Now the device contains
this functionality and it can be moved to a different virtual station.
To Next Page
Loading...
Need help?
General
