Atlas Copco POWER FOCUS 6000 User Manual

POCKET GUIDE TO POWER FOCUS 6000 SYSTEM POCKET GUIDE TO POWER FOCUS 6000 SYSTEM
38 39
STR TOOL ACCESSORIES
The STR tool can utilize two different accessories at a time.
The accessories consist of two halves, upper and lower and can be
combined in different ways, for example a scanner and headlight can
be put together on the front bus.
Used for reading bar codes or QR codes, connects to one of
the tool bus slots.
Button for sending instructions from the operator connects to
one of the tool bus slots.
Used to illuminate the work piece, connects to one of the tool
bus slots.
Suspension that allows the tool to rotate, used when attach-
ing the tool to a balancer.
Mounting Bracket Used for fixturing the tool
Protection Cover
Protection to avoid scratches caused by the tool in sensitive
applications.
Trigger that is offset for alternative grip connects to one of
the tool bus slots.
Shorter lever that can be used as a safety trigger connects to
one of the tool bus slots.
EHMI, small display that can show information about the
tightening and also acts as a Pset selector connects to one of
the tool bus slots.
Local customization
The tools can easily be fine-tuned to fit the operator preferences or the
application by adding tools accessories. The standardized sizes, fits a wide
range of Atlas Copco tools.

Atlas Copco POWER FOCUS 6000 Specifications

General

Brand	Atlas Copco
Model	POWER FOCUS 6000
Category	Controller
Language	English