Atlas Copco POWER FOCUS 6000 User Manual

POCKET GUIDE TO POWER FOCUS 6000 SYSTEM POCKET GUIDE TO POWER FOCUS 6000 SYSTEM
42 43
Types of cables available
Various types of cables are available from Atlas Copco to suit all kinds of
applications, as illustrated below.
Tensor STR cable
Tensor STR cable has the same functionality but
different interfaces towards the controller.
However, they have the same interface
towards the tool.
Tensor S Extension Cable.
Tensor S Extension Cable with loop. The
cable loop makes cable even more flexible
if the tool is used in small circles.
Tensor ST Spiral Cable.
Tensor S Extension Cable for
fixtured applications.
Tensor S Cable with 90°connector.
Angle connection cables for
applications where space does not
allow the use of normal cables.
Cable cover for workpiece surface protection.
Tensor S Tool Cable.
Tensor ST Tool Cable
Flat cable for greater durability
Atlas Copco has been producing assembly
tool cables since 1987 and has unrivaled
experience in the field. Flexibility and
durability have steadily improved since the
introduction of the company’s first-generation
cables, resulting in today’s optimum cable
performance. Atlas Copco’s flat-cable design
combines maximum flexibility (for access
to difficult applications) with maximum
durability. No other manufacturer can offer
such a powerful combination of flexibility and
performance.
Smaller bending radius for greater accessibility.
Atlas Copco engineers its tool cables to withstand consistent and long-
term flexing. Cable size (diameter) is the most
critical factor in terms of flex life. The best
way to reduce fatigue affecting the internal
cable conductors is to keep cable thickness to
a minimum. Atlas Copco’s flat-cable design is
just under half the thickness of a comparable
“round” cable, offering an exponential gain
in flex life. When it comes to durability and
flexibility, the Atlas Copco cable is unique.
Innovative ‘Cable Twist’ design
The most critical area for an assembly tool cable is at the point of maximum
flex – generally close to the tool connection point. Atlas Copco’s “Cable
Twist” design spreads the flex load over a greater distance, to minimize flex
in the critical area. This patented flat-cable “twist” design is unique to Atlas
Copco.
Round
Flat
Tensor Round

Atlas Copco POWER FOCUS 6000 Specifications

General

Brand	Atlas Copco
Model	POWER FOCUS 6000
Category	Controller
Language	English