Page 9
Unity Controller R9 Variants, Issue 13
3. 3 Intended Use of this Manual
This manual is intended to be used by trained operators of the equipment and Atlas Copco IAS
personnel when operating or maintaining the Self Pierce Riveting (SPR) equipment described.
The information contained within this manual is provided as a guide for the intended use of the
Henrob Self Pierce Riveting (SPR) equipment only. The information contained within this manual
does not pertain to any other equipment or its usage.
All users of the Henrob Self Pierce Riveting (SPR) equipment must read and understand the
information contained in this manual.
The safety warnings, cautions and notes should be adhered to at all times when carrying out any
of the procedures in this manual.
3. 4 Retention of Rights
Atlas Copco IAS retains the right to withdraw or change the information within this document, at
any time, without prior notication.
Atlas Copco IAS retains the rights to patents and patents pending, at all times, for this equipment.
3. 5 Warnings, Cautions and Notes
Warnings, cautions and notes appear throughout this document, at the point at which they are
relevant.
WARNING
This Warning symbol identies a potential hazard which may cause
fatal or serious injury to operating and maintenance personnel.
CAUTION
Cautions are intended to prevent possible damage to the component
parts of the equipment.
NOTE
Notes provide important/supporting information. A note is inserted to
aid personnel when working on the equipment.
To Next Page
Loading...
Need help?
General
