Atlas Copco Tensor STB User Manual

Appendix
9836 3043 01 27 (36)
6 Appendix
6.1 Docking station setup
Tensor STB docking station only works with Tensor STB33/STB63 tools and later.
The following equipment is needed.
 PC with at least Windows 2000.
 Tensor STB docking station with accessories.
 ToolsTalk Service software stored locally on your PC.
6.1.1 Connecting to PC
Hardware setup
1. Connect the power supply to the Tensor STB docking station.
2. Connect the Tensor STB docking station to the PC using the USB cable.
The Found New Hardware Wizard is displayed.
This may look different depending on the version of Windows being used.
Figure 26 Found New Hardware Wizard, first screen
3. Select No, not this time, and click Next.

Atlas Copco Tensor STB Specifications

General

Brand	Atlas Copco
Model	Tensor STB
Category	Power Tool
Language	English