Atlas Copco Tensor STB User Manual

Appendix
9836 3043 01 31 (36)
Connecting STB tool to ToolsTalk Service
1. Place the Tensor STB tool in the Tensor STB docking station.
2. Select Connection > Connect or click the Connection button on the toolbar.
The indicator on the docking station marked Pwr is lit and ToolsTalk Service opens the main window.
See User guide for ToolsTalk Service to perform the tool programming.
Disconnecting
To finish and disconnect, follow the sequence below.
 Select Connection > Disconnect or click the Connection button on the toolbar.
The indicator on the docking station marked Pwr is off.
 Disconnect the tool from the docking station.
6.2 ToolsTalk Service with Serial port adapter
For old Tensor STB32 tools which are adapted to blue tooth communication it is possible to connect to
ToolsTalk Service with the help of an IRC-B module connected to the PC with a regular RS232 serial
cable. In Options->Settings specify an appropriate port for the communication.
Figure 33 Connecting to Toolstalk Service with an IRC-B module
Perform a pairing with the same method as described in Section 3.6 Connecting tool with Power Focus
(Pairing).

Atlas Copco Tensor STB Specifications

General

Brand	Atlas Copco
Model	Tensor STB
Category	Power Tool
Language	English