AudioCodes MediaPack MP-11 Series Hardware Installation Manual

CHAPTER2 Unpacking the Device
Mediant 1000 Gateway & E-SBC | Hardware Installation Manual
2 Unpacking the Device
Follow the procedure below for unpacking the carton in which the device is shipped.
➢ To unpack the device:
1. Open the carton and remove the packing materials.
2. Remove the chassis from the carton.
3. Check that there is no equipment damage.
4. Ensure that in addition to the chassis, the package contains the following items:
● One or two AC power cables (depending on customer order)
● Four anti-slide bumpers for desktop installation
5. Check, retain and process any documents.
If there are any damaged or missing items, notify your AudioCodes sales representative.
- 2 -

AudioCodes MediaPack MP-11 Series Specifications

General

Brand	AudioCodes
Model	MediaPack MP-11 Series
Category	Gateway
Language	English