Clean PGM, Color Bar and Multiview out.
11.2. Multiview Out
The defaulted output of multiview port is the Multiview, the LED indicator of MV button in the front panel is
green. User can connect it to an additional LCD display to monitor the inputs, PVW, PGM and status
interface clearly. User can also configure the output of multiview port to other options according to their
application requirement. When Multiview output is defined as other output, for example SDI 1, user can
press the MV button to quickly switch the output between multiview out and configured SDI 1.
11.3. PGM Out
When one of outputs defined as PGM out, user can connect it to an additional LCD display to monitor the
PGM out video. The PGM out video is the program video including the overlay images from USK and DSK.
PGM Clean out is the program video removing the overlay images from DSK.
11.4. USB Out
Connecting the USB output to a PC with a type-C USB2.0 cable, user can use software like OBS,
PotPlayer, VMix, etc. to play or store the captured USB Out video and audio on live streaming platforms
like YouTube, Facebook, Twitter, etc. The USB2.0 streaming output is based on UVC (USB video class)
and UAC (USB audio class) standard. No additional drivers need be installed. The relevant video and
audio devices will be detected in the Windows Device Manager as below:
• Under Imaging Devices: USB Capture Video
: LED indicator on, multiview output port shows the Multiview.
: LED indicator off, multiview output port shows the configured other output.
To Next Page
Loading...
Need help?
General
