EasyManuals Logo
Home>Axon>Digital Camera>AX1005

Axon AX1005 User Manual

Axon AX1005
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
4
Axon Flex 2 User Manual
Chapter 2: Getting to Know Your Axon Flex 2 Camera
*** When the Function LED also is blinking green.
Controller Function LED
Shows when certain functions are enabled.
Function Enabled Function LED
Mute Blinking blue
Camera error* Solid red
Pairing mode Blinking green
* Use the power switch to turn the camera o and on.
Connection Socket – Enables data transfer and recharging.
Slide Lock – Holds the cable to the controller.
On/O SwitchTurns the camera’s power on or o.
On/O Indicator – When the camera’s power is turned on, the red portion is exposed. When the
camera power is turned o, the red portion is covered from view.
Speaker – Provides audio notifications.
Function Button – Used in device pairing, to mute the device, and to add markers to the video as
it is recorded.
EVENT Button – Used to start and stop recording. (Double-press to start; hold for 4 seconds to
stop recording.)
The camera might take several additional seconds to close out of the video when it is powered o
before stopping an event.
Battery Status Button – When pressed, the Battery button lights up the Battery LED, which mo-
mentarily indicates the remaining battery capacity only (with default settings, the Battery LED
does not indicate the operating mode).
Battery LED
When lit, momentarily indicates the remaining battery capacity (with default settings, it does not
indicate the operating mode).
When you turn the camera on, the Operation LED turns solid red until the system is ready to use.
Then the Operation LED blinks green (BUFFERING mode). The camera can be configured so the
Battery LED operates in sync with the Operation LED. In BUFFERING mode both the Operation
and Battery LEDs will blink green, and in EVENT mode both will blink red. If the battery status
button is pressed, the battery LED displays the battery status for approximately 10 seconds and
then resumes displaying the EVENT mode.
Battery Status Battery LED
Battery capacity is 41–100 percent Green
Battery capacity is 20–40 percent Yellow
Battery capacity is less than 20 percent Red

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Axon AX1005 and is the answer not in the manual?

Axon AX1005 Specifications

General IconGeneral
BrandAxon
ModelAX1005
CategoryDigital Camera
LanguageEnglish

Related product manuals