Baur Syscompact 2000 User Manual

17
After a flashover in the cable or after interrupting the test e.g. by pressing the emergency-off
button, the DUT still can carry voltage. Therefore the DUT firstly has to be discharged and
afterwards grounded before handling.
For correct discharging and grounding, the discharge/grounding – rod has to be connected to
protection/station earth correctly. Hold the rod by the handle only. Pay attention to the
minimum discharge time indicated on the rod.

Baur Syscompact 2000 Specifications

General

Brand	Baur
Model	Syscompact 2000
Category	Test Equipment
Language	English