Baur Syscompact 2000 User Manual

8
2.2 Secondary Impulse Method
The IRG sends a low
voltage impulse into the
cable under test, it is
reflected positively by the
cable end. Not visible at
this first measurement is
the high resistive fault.
A high voltage impulse
released from the SSG
ignites an arc at fault.
The IRG again sends a
low voltage impulse.
This low voltage impulse
is reflected by the arc at
fault position negative.

Baur Syscompact 2000 Specifications

General

Brand	Baur
Model	Syscompact 2000
Category	Test Equipment
Language	English