SERVSWITCH™
50
4.0 Audio, Serial, and their Cables
ServSwitch supports serial pass-through or full stereo audio. Using a special CPU and KVM
adapter cable, you can connect directly to a CPU’s sound card and to a pair of computer
speakers or headphones at the KVM station.
You can also, with special cables, connect to the CPUs MIC input and add a microphone to
your KVM station.
The serial feature supports pass0-through serial data for Touchscreen, graphic tablet, and other
pass-through serial devices.
4.1 Audio connectivity:.
The audio feature of ServSwitch supports typical audio levels produced from a computer
sound card’s speaker output. Powered speakers can be used for increased volume.
Connect each computer to the corresponding ServSwitch’s CPU port using a CPU adapater
cable configured with a DB25M connector on one end and a PS/2 keyboard and mouse
connector, HD15M video connector, and 2-3.5 mm Stereo connectors on the other end
(speaker and microphone input). Connect your KVM station to the ServSwitch’s KVM
port using a KVM adapter cable configured with a DB25M connector on one end and a
PS/2 keyboard and mouse connector, HD15F video connector, and 2-3.5mm Stereo audio
connectors on the other end (speaker and microphone output). Audio produced from each
connected computer can be listened to when you switch to that PCU port’
Audio CPU adapter cables – EHN151A-nnnn (PS/2 keyboard/mouse/3.5mm stereo audio)
EHN382A-nnnn (PS/2 keyboard/mouse/3.5mm stereo audio)
EHN485A-nnnn (PS/2 keyboard/mouse/3.5mm stereo audio).
Audio KVM adapter cables – EHN154A-nnnn (PS/2 keyboard/mouse/3.5mm stereo audio)
EHN383A-nnnn (PS/2 keyboard/mouse//3.5mm stereo audio)
To Next Page
Loading...
Need help?
General