SERVSWITCH™
64
5.3.3 Configure Computers: Mouse
Use this field to tell the ServSwitch what type of mouse a given CPU uses. The
factory default is “PS/2” (non-wheel). To change a CPU port’s mouse type, press
[Enter] while the corresponding “Mouse” field is highlighted. A mouse-type input
box appears, as shown in Figure 5-8 below.
Figure 5-8. Changing a CPU port’s mouse type.
Use the arrow keys to select the desired mouse type and hit [Enter]. The input
box disappears and the new setting appears in the appropriate “Mouse” field.
The appropriate mouse driver must be loaded and configured on the CPU for
mouse communication to work properly. The differences between the various
mouse types are discussed in Section 5.2.2.
To Next Page
Loading...
Need help?
General