Blaupunkt Calais MP48 User Manual

56
Scanning tracks (SCAN)
To scan all the tracks of the MP3 data car-
rier in ascending order for approx. 10 sec-
onds each,
press the 4 button < repeatedly
until "SCAN TRK" appears on the
display 6.
During the scanning, the "MP3" or "USB"
display fl ashes.
To scan all the tracks in the current direc-
tory in USB mode,
press the 4 button < repeatedly
until "SCAN FLD" appears on the
display 6.
During the scanning, the "USB" display
fl ashes.
Stopping Scan
To stop scanning,
press the 4 button < repeatedly
until "SCAN OFF" appears on the
display 6.
The currently scanned track will then con-
tinue to be played normally.
Repeating individual tracks or
whole directories (REPEAT)
To repeat the current track,
press the 2 button < repeatedly until
"RPT TRK" appears on the display 6.
The RPT symbol appears on the display
6.
To repeat the current directory,
press the 2 button < repeatedly until
"RPT DIR" or "RPT FLD" appears on the
display 6.
The RPT symbol appears on the display
6.
쏅
쏅
쏅
쏅
쏅
Cancelling REPEAT
To quit the repeat,
press the 2 button < repeatedly until
"RPT OFF" appears on the display 6.
The RPT symbol on the display 6 disap-
pears.
Interrupting playback (PAUSE)
Press the 1 button <.
The display 6 shows "PAUSE".
Cancelling pause
During the pause, press the 1 button
<.
Playback is continued.
쏅
쏅
쏅
MP3/WMA mode
02_CalaisMP48_gb.indd 5602_CalaisMP48_gb.indd 56 11.06.2008 15:12:30 Uhr11.06.2008 15:12:30 Uhr

Blaupunkt Calais MP48 Specifications

General

Brand	Blaupunkt
Model	Calais MP48
Category	Car Receiver
Language	English