62
Adjusting the level of the AUX
input
If you adjusted the AUX input to "AUX" for
connecting external audio sources, you can
adjust the level of the external audio source
to the level of the audio source of the device
(such as CD and radio).
Note:
You can adjust the level for the AUX
input only if AUX is selected as audio
source.
If necessary, press the SRC button >
repeatedly until "AUX" appears on the
display.
Press the MENU button 7.
Press the
or button 8 repeated-
ly until "GAIN" appears on the display
with the current setting.
Press the
or button 8 to adjust
the level adjustment between –9 and
+9.
To exit the menu,
press the MENU button 7.
쏅
쏅
쏅
쏅
쏅
Restoring factory settings
(RESET)
You can restore the original factory settings
of the device.
Press and hold down the AUD button
: for longer than approx. 10 sec-
onds.
A confi rmation beep sounds and the display
6 briefl y shows "RESET". All the menu and
audio menu settings are reset to the factory
settings.
Note:
Stations stored at the station buttons
are not deleted.
쏅
External audio sources Factory settings
02_CalaisMP48_gb.indd 6202_CalaisMP48_gb.indd 62 11.06.2008 15:12:32 Uhr11.06.2008 15:12:32 Uhr
To Next Page
Loading...
Need help?
General
