Blaupunkt LOS ANGELES MP71 User Manual

39
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
DANSK
Sound and volume
distribution settings
Note:
● You can adjust the bass, treble and
loudness individually for each audio
source.
Adjusting the bass
➮ Press the AUD button 9.
“BASS” appears in the display.
➮ Press the or button 7 to adjust the
bass.
When you have finished making your changes,
➮ press the AUD button 9.
Adjusting the treble
➮ Press the AUD button 9.
“BASS” appears in the display.
➮ Keep pressing the or button 7 un-
til “TREBLE” appears in the display.
To adjust the treble,
➮ press the or button 7.
When you have finished making your changes,
➮ press the AUD button 9.
Loudness
The loudness feature can be used to aurally
compensate (boost) the bass at low volume
levels.
➮ Press the AUD button 9.
“BASS” appears in the display.
➮ Keep pressing the or button 7 un-
til “LOUD” appears in the display.
To adjust the loudness,
➮ press the or button 7.
“LOUD OFF” means loudness is deactivat-
ed; “LOUD 6” means maximum loudness
boost.
When you have finished making your changes,
➮ press the AUD button 9.
Adjusting the right/left volume
distribution (balance)
To adjust the balance,
➮ press the AUD button 9.
“BASS” appears in the display.
➮ Keep pressing the or button 7 un-
til “BAL” appears in the display.
To adjust the right/left volume distribution,
➮ press the or button 7.
When you have finished making your changes,
➮ press the AUD button 9.
Adjusting the front/back volume
distribution (fader)
To adjust the fader,
➮ press the AUD button 9.
“BASS” appears in the display.
➮ Keep pressing the or button 7 un-
til “FADER” appears in the display.
To adjust the front/back volume distribution,
➮ press the or button 7.
When you have finished making your chang-
es,
➮ press the AUD button 9.
TA-SOUND
You can separately adjust the sound and vol-
ume distribution settings for traffic informa-
tion announcements.
➮ Press and hold the softkey 4 that cor-
responds to the “TA” display item for
longer than two seconds.
“TA-SOUND” appears in the display.
➮ Keep pressing the or button 7 un-
til the required parameter appears in the
display.
➮ Make your adjustments using the or
button 7.
When you have finished making your changes,
➮ press the AUD button 9.
SOUND AND VOLUME DISTRIBUTION SETTINGS

Blaupunkt LOS ANGELES MP71 Specifications

General

Brand	Blaupunkt
Model	LOS ANGELES MP71
Category	Car Receiver
Language	English