Blaupunkt Melbourne SD27 User Manual

25
DANSK
ENGLISH ENGLISHFRANÇAISITALIANO
NEDERLANDS
SVENSKAESPAÑOL
PORTUGUÊS
X-BASS | Display
When you have fi nished making your chang-
es,
press the AUDIO button <.
Adjusting E-XBASS
In the "E-XBASS" submenu, you can also ad-
just the cut-off frequency in addition to the
X-BASS boost. You can select from 50 Hz,
100 Hz and 200 Hz.
Press the AUDIO button <.
"BASS" appears on the display.
Press the
or button 5 repeatedly
until "ENHANCED" appears on the dis-
play.
Press the M/OK button > to display the
submenu.
"E-BASS" appears on the display.
Press the
or button 5 repeatedly
until "E-XBASS" appears on the display.
Press the
button 5 to call up the
submenu.
"GAIN" and the currently set value are dis-
played.
Press the
or button 5 to select
between "GAIN" (X-BASS boost) and
"FREQ" (frequency).
Press the
or button 5 to change
the selected setting.
When you have fi nished making your chang-
es,
press the AUDIO button <.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Display
If you switch on the vehicle illumination,
the display brightness switches day mode
to night mode. This requires that your car
sound system is connected as described in
the installation instructions. Your vehicle
must feature the corresponding connection
option.
Adjusting the display brightness
You can adjust the display brightness sepa-
rately for night (DIM NIGHT) and day (DIM
DAY) in steps ranging from 1 to 16.
Press the M/OK button >.
The display shows "MENU".
Press the
or button 5 repeatedly
until "DIM DAY" or "DIM NIGHT" appears
on the display.
Press the M/OK button > to display
the submenu.
"DIM DAY" or "DIM NIGHT" and the currently
set value are displayed.
Press the
or button 5 to adjust the
brightness.
When you have fi nished making your chang-
es,
press the M/OK button >.
To exit the menu,
press the ESC button 6 or wait approx.
8 seconds.
쏅
쏅
쏅
쏅
쏅
쏅
MelbourneSD27.indb 25 1/31/07 2:10:08 PM

Blaupunkt Melbourne SD27 Specifications

General

Brand	Blaupunkt
Model	Melbourne SD27
Category	Car Receiver
Language	English