Blaupunkt Melbourne SD27 User Manual

6
About these instructions
About these instructions
These instructions contain important infor-
mation to easily and safely install and oper-
ate the device.
Read these instructions carefully and
completely before using the device.
Keep the instructions at a location so
that they are always accessible to all
users.
Always pass on the device to third par-
ties together with these instructions.
In addition, observe the instructions of the
devices used in conjunction with this de-
vice.
Symbols used
These instructions employ the following
symbols:
DANGER!
Warns about injuries
DANGER!
Warns about accidents
DANGER!
Warns about hearing loss
The CE mark confi rms the compliance
with EU directives.
Identifi es a sequencing step
Identifi es a listing
•
•
•
쏅
•
Use as directed
This device is intended for installation and
operation in a vehicle with 12 V vehicle
system voltage and must be installed in a
DIN slot. Observe the 'performance limits
in the technical data. Repairs and installa-
tion, if necessary, should be performed by
a specialist.
Declaration of conformity
The Blaupunkt GmbH declares that the
device Melbourne SD27 complies with the
basic requirements and the other relevant
regulations of the directive 89/336/EWG.
MelbourneSD27.indb 6 1/31/07 2:10:02 PM

Blaupunkt Melbourne SD27 Specifications

General

Brand	Blaupunkt
Model	Melbourne SD27
Category	Car Receiver
Language	English