23
II) Shelves
1. Choose ruler and set stops
• Recommended rulers:
- Horizontal ruler MZL.2060
- Standard ruler MZL.2000
• Set the stops at the intervals desired
2. Insert drilling head and ruler
• Insert ruler into machine
• Clamp drill bits in drill chucks
5 x 8 mm Ø, clockwise
4 x 8 mm Ø, anti-clockwise
or
5 x 10 mm Ø, clockwise
4 x 10 mm Ø, anti-clockwise
• Insert drilling head at a right angle to
ruler
3. Adjust drilling depth
4. Set worktable to drilling distance
desired
Comment
We recommend setting the
first bore hole at 32 mm
5. Proceed to drill
• Place work piece on worktable and
drill for dowels
Working with MTZ.2880
F
F
!
To Next Page
Loading...
General