BPAP Series User Manual V1.0
10 / 58
iCode
A feature that is intended to give access to compliance and therapy management information.
The ―iCode‖ consists of six separate codes displayed in the Patient Menu, each code is a
sequence of numbers. The ―iCode QR‖ and ―iCode QR+‖ display two-dimensional codes.
LPM
Liters Per Minute.
OSA
Obstructive Sleep Apnea.
Patient Menu
The display mode in which you can change patient-adjustable device settings, such as the
starting pressure for the Ramp feature.
Ramp
A feature that may increase patient comfort when therapy is started. It can reduce pressure
and then gradually increase the pressure to the prescription setting so the patient can fall
asleep more comfortably.
Rise Time
The time it takes for the device to change from EPAP to IPAP. You can adjust this time for
your comfort.
Res Rate
Respiratory Rate. Number of breaths per minute.
Reslex
A therapy feature that is enabled by your home care provider to provide pressure relief
during exhalation.
Standby State
The state of the device when power is applied but the airflow is turned off.
min
Means the time unit ―minute‖.
h
Means the time unit ―hour‖.
yy mm dd / mm dd yy / dd mm yy
Denotes date.
To Next Page
Loading...
Need help?
General
