BPAP Series User Manual V1.0
35 / 58
16.2 Options of the Patient Menu and Corresponding
Descriptions
There are six humidity levels available. As the
numbering increases, the humidity rises accordingly.
―Off‖ means the humidifier is turned off.
Set humidifier to preheat by adjusting this option.
This feature automatically turns off after 30 minutes
This feature enables the device to automatically reduce
the treatment pressure when the patient exhales, so as
to make the user more comfortable. The higher the
numbering is, the more pressure the device reduces.
―Off‖ means this feature is disabled.
There are five heat levels available. As the
numbering increases, the heat rises accordingly.
―Off‖ means the heat is turned off.
Note: Heated Tubing is displayed in the patient
menu only when it is connected
In order to increase comfort and help the patient fall
asleep easily, the pressure can increase gradually,
when the Ramp feature is enabled. The ramp time
during which the initial pressure rises to the
prescribed treatment pressure can be adjusted. As
you turn the Knob to the nearest point, the
numbering increases or decreases by five seconds.
The screen displays a real-time countdown of the
remaining ramp time in seconds
When the humidifier is on, this feature allows the
airflow to continue for about 15 minutes at a low
pressure (about 2 hPa) after you press the Start /
Stop to discontinue treatment. This will
blow off the vapor left in the water chamber to avoid
any damage to the device. When this feature is set
to ―Off,‖ which means it is disabled, the airfolw stops
delivering air instantly after you press the Start /
Stop .
Set date by adjusting this option
yy mm dd /
mm dd yy /
dd mm yy
Turn the Knob to choose among three date
formats.
Set time by adjusting this option
To Next Page
Loading...
Need help?
General
