BMC BPAP Series User Manual

BPAP Series User Manual V1.0
32 / 58
Fig. 16-2
Fig. 16-3
Note: The above interface only applicable to the device does not activate the SmartC,
SmartA or SmartB. If the SmartC, SmartA or SmartB is enabled, and the symbol will
appear in the status bar at the top of the screen, as shown in Fig. 16-4.
Fig. 16-4
The first icon on the upper part of the screen indicates the Preheat Function Icon, the
second icon indicates the Accessorie, and the third icon indicates Mask Setup Icon,
the fourth icon indicates the Report Interface Icon, the fifth icon indicates the
Initial Setup Icon. As you turn the Knob , the cursor switches among the five icons.
Note: As the humidity levels is off, the Preheat Function Icon will become gray, as
shown in Fig. 16-2.
16.1.2 Bringing up the Initial Setup Interface
After the display screen displays the Main Interface shown in the Fig. 16-1, turn the Knob
. When the cursor is on the icon , press the Knob , the screen displays the Initial
Setup Interface of the Patient Menu, as shown in Fig. 16-5.

BMC BPAP Series Specifications

General

Brand	BMC
Model	BPAP Series
Category	Oxygen Equipment
Language	English