BMC BPAP Series User Manual

BPAP Series User Manual V1.0
22 / 58
12.5 Using the Ramp Feature
Every time the feature is enabled, the pressure will drop to the initial pressure, and then
gradually rise to the prescribed treatment pressure according to the preset ramp time, so as
to make the patient fall asleep easily. The screen displays a real-time countdown of the
remaining ramp time in minutes.
CAUTIONS!
• You can use the ramp feature as often as you wish during sleep.
• The ramp feature is not prescribed for all users.
12.6 Accessing the iCode
After the device is powered on, move the cursor to the icon by turning the Knob ,
as shown in the Fig. 12-1. Access the iCode information by pressing the Knob , the
screen displays the iCode Inerface, as shown in the Fig. 12-2.
Fig. 12-1
Fig. 12-2
12.7 Turning the Device Off
Take off the mask and headgear, press the Start / Stop Button , and the device
will stop delivering air. Disconnect the power cord from the power outlet to power off the
device.
CAUTION!
• Do not position the device where it is difficult to disconnect the device.

BMC BPAP Series Specifications

General

Brand	BMC
Model	BPAP Series
Category	Oxygen Equipment
Language	English