G2S BPAP Series User Manual V2.1
33 / 43
• Do not maintain the device in using.
CAUTIONS!
• Overheating of the materials could lead to early fatigue of these materials.
• Do not use solutions containing chlorinated lime, chlorine, or aromatic to clean the device
and its accessories. Liquid soap containing moisturizing agents or antimicrobials should not
be used either. These solutions may harden cleaned materials or reduce their lifespan.
• Do not clean or dry the device and its accessories when the temperature is higher than
80°C (176˚F). High temperatures could reduce product life.
• Do not immerse the device in any fluids.
16.1 Cleaning the Mask and Headgear
For details, refer to the cleaning instructions in the user manual for the mask.
16.2 Cleaning the Optional Kits
For details, refer to the cleaning instructions in the user manual for the corresponding user
manual.
CAUTIONS!
• It is recommended to clean the SpO
2
&GPRS Kit / SpO
2
Kit / Cellular Module once a week.
16.3 Cleaning the Water Chamber
(1) Opening the Water Chamber: Open the cap of the water chamber, as shown in Fig.
16-1.
Fig. 16-1
(2) Cleaning the Water Chamber: You may also clean the water chamber with a soft cloth
which does not scratch the water chamber (dip the soft cloth in liquid soap if necessary),
rinse it thoroughly, and then wipe it dry with a soft cloth.
(3) Returning the Water Chamber according to instructions in 13.1.3.
WARNINGS!
• Emptying and cleaning the water chamber daily will help prevent mold and bacteria
growth.
• Allow the water in the chamber to cool down to room temperature before removing it from
the device.
To Next Page
Loading...
Need help?
General
