A timemachine frameset or complete bike includes proprietary components such as brakes, fork, headset, stem, seat post … For each
of those components, you will find part numbers, service and assembly instructions detailed in the next chapters of this manual.
Building a timemachine
Before you start assembling, make sure you are equipped with the following tools:
- Allen keys: 2mm, 2.5mm, 3mm, 4mm, 5mm
- Ratchet wrench with 8mm allen socket
- Flat wrench 9mm, 13mm
- Red Loctite 271
- Grease gun or grease brush
- Wire cutter pliers
- Long reach pliers
- A black marker pen
- Electrical tape
- 1 extra shifting cable
- Heat gun or hair dryer
- Torque wrench with 4, 5 and 8mm allen heads sockets
- Carbon friction paste
- Bike stand with fixation for frame and fork
Recommended tooling
12 | 13
Building
Building a timemachine
To Next Page
Loading...
Need help?
General
