Replacing parts
132
3. Push the wire bracket to the side out of the
mounting, arrow 1, and fold it down,
arrow 2.
4. Remove the bulb.
5. Insert a new bulb as shown in the detail of
the illustration above.
6. Fold up the wire bracket and lock it.
7. Connect the plug.
8. Reattach the cover.
Replacing the low-beam headlight and
high-beam headlight, version 2
1. Remove the relevant cover for the head-
light.
2. Push the bulb at the plug upwards against
the holder, see arrow, and pull it backwards
to remove.
3. Disconnect the plug from the light.
4. Connect the plug to the new bulb.
5. Insert the bulb into the holder at the top and
push it forwards to engage.
6. Reattach the cover.
Side and parking lights
5 watt bulb, W5W
1. Remove the cover for the high-beam head-
light.
2. Pull out the bulb holder, see arrow.
3. Pull out the bulb and change it.
4. Insert the bulb holder.
5. Reattach the cover.
Front turn indicators
21 watt bulb, PY21W
or PY21W Silver Vision
1. Open the flap in the wheel well, see Access
through the wheel well on page 131.
2. Turn the turn-indicator holder 1 to the left
and remove.
3. Press the bulb in slightly and turn to the left,
take out and change it.
4. Insert the turn-indicator holder 1.
5. Attach the flap to the wheel well.
Rear lights
Saloon
> Rear fog light:
H21W bulb, 21 watts
> Other lights:
P21W bulb, 21 watts
Online Edition for Part no. 01 41 0 013 257 - © 02/07 BMW AG
To Next Page
Need help?
General
