Everything under control
64
Settings and information
Operating principle
Some settings can only be made and some
information only be called up when the ignition
is switched on. Some settings cannot be made
while the vehicle is being driven.
1 Button for:
> Selecting display
> Setting values
2 Button for:
> Confirming selected display or set val-
ues
> Calling up computer information 63
3 When the lights are switched on: instrument
lighting brightness 82
4 Calling up Check Control 68
5 Checking engine oil level
*
123
6 Initialising the Run Flat Indicator 74
7 Setting the clock 67
8 Setting the date 67
9 Viewing Next Service indicator 66
10 Setting formats and units of measure,
resetting to factory settings 65
11 Adjusting settings
> Confirmation signals for locking and
unlocking of the vehicle 18
> Characteristics during unlocking 17
> Automatic locking 20
> Headlight courtesy delay feature 78
> Daytime driving lights 79
> Triple turn signal 50
> Seat memory
*
36
Exiting displays
The outside temperature reading and the time
reappear when you press button 2 or if you
make no entries within approx. 15 seconds. If
required, complete the current setting first.
Online Edition for Part no. 01 41 0 013 257 - © 02/07 BMW AG
To Next Page
Loading...
Need help?
General
