ATTENTION
Unsuitable chargers con-
nected to the power socket.
Damage to charger and chassis
electronics.
Use suitable BMW chargers.
The correct charger is avail-
able through your authorized
BMW Motorrad retailer.
Charge disconnected battery
via onboard socket.
NOTICE
The motorcycle's onboard elec-
tronics know when the battery
is fully charged. The onboard
socket is switched off when this
happens.
Comply with operating instruc-
tions of charger.
NOTICE
If you are unable to charge the
battery via the onboard socket,
you may be using a charger that
is not compatible with your mo-
torcycle's electronics. In this
case, charge the battery directly
at the terminals of the discon-
nected battery.
Charging disconnected
battery
Charge battery using a suitable
charger.
Comply with operating instruc-
tions of charger.
After charging, remove terminal
clamps of the charger from the
battery terminals.
NOTICE
In the case of longer periods
when the motorcycle is not be-
ing used, the battery must be
recharged regularly. See the
instructions for caring for your
battery. Always fully recharge
the battery before returning it to
use.
Removing battery
Park motorcycle, ensuring that
support surface is firm and
level.
with anti-theft alarm system
(DWA)
OE
Switch off anti-theft alarm sys-
tem if necessary.
Deactivate alarm function
( 65).
Switch off ignition.
Remove the seat ( 58).
Remove center fairing panel
( 121).
8
126
z
Maintenance
ProCarManuals.com
To Next Page
Loading...
Need help?
General
