ASC indicator and warning
light lights up.
Release button 1 within two
seconds.
ASC indicator and warning
light continues to be lit up.
ASC function is deactivated.
Activating ASC function
Switch on ignition ( 38).
NOTICE
The ASC function can also be
switched on while riding.
Press and hold button 1, main-
taining pressure until the ASC
warning lamp's display status
changes.
ASC indicator and warning
light goes out, and starts
to flash if self-diagnosis has not
been completed.
Release button 1 within two
seconds.
ASC indicator and warning
light remains off or contin-
ues to flash.
ASC function is activated.
As an alternative, the ignition
can also be switched off and
then on again.
NOTICE
If the ASC indicator and warn-
ing light lights up after switching
the ignition off and on and then
continuing to ride at more than
3 mph (5 km/h), an ASC fault has
occurred.
Riding mode
with ABS and ASC
OE
Riding mode
BMW Motorrad has evolved two
application scenaria for your mo-
torcycle, allowing you to select
the one that is best suited to
your current conditions:
ROAD: highway operation
ENDURO: off-road mode
The system then dials in the
ideal wheel slip rate for the
closed-loop control provided by
ABS and ASC on every type of
road surface.
NOTICE
Detailed information regarding
the off-road mode can be found
in the section entitled "Technol-
ogy in detail."
4
49
z
Operation
ProCarManuals.com
To Next Page
Loading...
Need help?
General
