Apply uniform pressure to push
front wheel stand down and
raise motorcycle.
with center stand
OE
ATTENTION
Lifting-off of the main stand
if the vehicle is raised too
high.
Component damage cause by
tipping over.
When raising the motorcy-
cle, make sure that the center
stand remains on the ground.
Adjust the height of the front
wheel stand if necessary.
Ensure that motorcycle is
standing securely.
Light sources
Replacing low and high-
beam bulbs in headlight
Park motorcycle, ensuring that
support surface is firm and
level.
Switch off ignition.
Turn cover panel 1 on high-
beam headlamp or cover
panel 2 on lowbeam headlamp
to the left.
Remove cover 1 or 2.
Disconnect plug 1.
Remove wire spring clip 1 from
the retainers and fold to side.
8
115
z
Maintenance
ProCarManuals.com
To Next Page
Loading...
Need help?
General
