Motion sensor when
transporting the
motorcycle
If, for example, the motorcycle
is to be transported by train, it is
advisable to switch off the motion
sensor. The strong movements
could result in an accidental trig-
gering of the alarm.
Deactivating motion
sensor
Press button 1 of the remote
control again during the activa-
tion phase.
Turn indicators are illuminated
three times.
Alarm tone sounds three times.
Motion sensor is deactivated.
Alarm function
with anti-theft alarm system
(DWA)
OE
Alarm triggering
The alarm can be set off by:
the motion sensor
Switching on the ignition with
an unauthorized key
Disconnection of the DWA
from the motorcycle battery
(DWA battery assumes the
power supply).
Alarm
The duration of the alarm
is 26 seconds. The system
is reactivated after another
12 seconds. A triggered alarm
can be interrupted at any time
by pressing the button 1 of the
remote control. This function
does not change the state of the
anti-theft alarm system.
During the alarm, an alarm tone
sounds and the turn indicators
flash. The type of alarm sound
can be programmed.
5
64
z
Anti-theft alarm system DWA
ProCarManuals.com
To Next Page
Loading...
Need help?
General
