Activation with motion
sensor
The alarm function will be acti-
vated
by pressing the button 1 of the
remote control once or
by switching off the ignition (if
programmed); after the ignition
is switched off, 30 seconds
pass until the activation phase.
Activation is confirmed
by the turn indicators lighting
up twice and
with a double alarm tone.
If the alarm function is to be acti-
vated after the ignition has been
switched off for more than one
minute, then the button 1 must
be pressed for longer than one
second.
Activation phase
The anti-theft alarm system re-
quires 15 seconds until it is com-
pletely activated. No alarm trig-
gering takes place during this
time.
Protection of the battery
in the control unit (anti-
theft alarm system
activated)
If the alarm function is to be acti-
vated after the ignition has been
switched off for more than one
minute, then the button 1 must
be pressed for longer than one
second. After approx. one hour
in the deactivated state, the DWA
switches off to protect the bat-
tery. To activate the alarm func-
tion after this period, the ignition
must be switched on and then
off again.
5
63
z
Anti-theft alarm system DWA
ProCarManuals.com
To Next Page
Loading...
Need help?
General
