Care products
BMW Motorrad recommends
that you use the cleaning
and care products you can
obtain from your authorised
BMW Motorrad dealer. The sub-
stances in BMW CareProducts
have been tested in laboratories
and in practice; they provide
optimised care and protection
for the materials used in your
vehicle.
ATTENTION
Use of unsuitable cleaning
and care products
Damage to vehicle parts
Do not use solvents such as
cellulose thinners, cold clean-
ers, fuel or the like, and do
not use cleaning products that
contain alcohol.
Washing the vehicle
BMW Motorrad recommends
that you use BMW insect re-
mover to soften and wash off
insects and stubborn dirt on
painted parts prior to washing
the motorcycle.
To prevent stains, do not wash
the vehicle immediately after it
has been exposed to strong sun-
light and do not wash it in the
sun.
To remove road salt, clean the
motorcycle with cold water im-
mediately after every trip.
WARNING
Wet brake discs and brake
pads after vehicle wash, after
riding through water and in
rainy conditions
Diminished braking effect, risk of
accident
Apply the brakes in good time
to allow the friction and heat to
dry the brake discs and brake
pads.
ATTENTION
Effect of road salt intensified
by warm water
Corrosion
Use only cold water to wash off
road salt.
ATTENTION
Damage due to high water
pressure from high pressure
cleaners or steam cleaners
Corrosion or short circuit, dam-
age to labels, seals, hydraulic
brake system, electrical system
and the motorcycle seat
Exercise restraint when using
a steam jet or high pressure
cleaning equipment.
10
112
z
Care
To Next Page
Need help?
General
