Ignition
Keys
You receive 2 vehicle keys.
Ignition switch/steering lock, fuel
filler cap lock and seat lock are all
operated with the same key.
Lock the handlebars
ATTENTION
Handlebars turned in wrong
direction when motorcycle
propped on side stand
Risk of damage to parts if vehicle
topples
On level ground, always turn
the handlebars to the left to set
the steering lock.
In all other cases it is the lie of
the ground that determines the
direction in which the handle-
bars should be turned.
If the camber of the roadway
permits, turn the handlebars all
the way to the left.
Push the ignition key 1 into
the steering lock and turn to
the LOCK position, moving the
handlebars slightly as you do
this.
Ignition, lights and all function
circuits are switched off.
Handlebars are locked.
Vehicle key can be removed.
Switching on ignition
Insert the ignition key 1 into
the ignition steering lock and
turn it to the ON position.
Side light, low-beam head-
light and all function circuits
are switched on.
Engine can be started.
Pre-Ride-Check is performed.
( 53)
ABS self-diagnosis is per-
formed ( 54)
4
36
z
Operation
To Next Page
Loading...
Need help?
General
