NOTICE
The case and topcase do not
have any surface coating. The
following care steps will ensure
the best-possible appearance:
Remove road salt and corrosive
deposits immediately at the end
of the journey with cold water.
Cleaning easily
damaged components
Plastics
ATTENTION
Use of unsuitable cleaning
agents
Damage to plastic surfaces
Do not use cleaning agents
that contain alcohol, solvents or
abrasives.
Do not use insect-remover
pads or cleaning pads with
hard, scouring surfaces.
Body panels
Clean trim panel components
with water and BMW Motorrad
solvent cleaner.
NOTICE
Soften stubborn dirt and insects
by covering the affected areas
with a wet cloth.
Light topcase
ATTENTION
Use of unsuitable cleaning
and care products
Damage to the surface
Clean the surface using only
water and a microfibre cloth.
Chrome
Carefully clean chrome sections
with a generous amount of water
and motorcycle cleaner from the
care series BMW Motorrad Care
Products. This applies especially
where road salt has been in use.
For an additional treatment, use
BMW Motorrad metal polish.
Radiator
ATTENTION
Bending of radiator fins
Damage to radiator fins
Take care not to bend the radi-
ator fins when cleaning.
Clean radiator regularly. Use a
hose with low water pressure,
for example, to do this.
This prevents the engine from
overheating due to insufficient
cooling.
Rubber
Treat rubber components with
water or BMW rubber-care
products.
10
113
z
Care
To Next Page
Loading...
Need help?
General
